SYNOPSIS
gcov [-v│--version] [-h│--help]
[-a│--all-blocks]
[-b│--branch-probabilities]
[-c│--branch-counts]
[-n│--no-output]
[-l│--long-file-names]
[-p│--preserve-paths]
[-f│--function-summaries]
[-o│--object-directory directory│file] sourcefile
[-u│--unconditional-branches]
DESCRIPTION
gcov is a test coverage program. Use it in concert with GCC to analyze
your programs to help create more efficient, faster running code and to
discover untested parts of your program. You can use gcov as a profil‐
ing tool to help discover where your optimization efforts will best
affect your code. You can also use gcov along with the other profiling
tool, gprof, to assess which parts of your code use the greatest amount
of computing time.
Profiling tools help you analyze your code’s performance. Using a pro‐
filer such as gcov or gprof, you can find out some basic performance
statistics, such as:
· how often each line of code executes
· what lines of code are actually executed
· how much computing time each section of code uses
Once you know these things about how your code works when compiled, you
can look at each module to see which modules should be optimized. gcov
helps you determine where to work on optimization.
Software developers also use coverage testing in concert with test‐
suites, to make sure software is actually good enough for a release.
Testsuites can verify that a program works as expected; a coverage pro‐
gram tests to see how much of the program is exercised by the test‐
suite. Developers can then determine what kinds of test cases need to
be added to the testsuites to create both better testing and a better
final product.
You should compile your code without optimization if you plan to use
gcov because the optimization, by combining some lines of code into one
function, may not give you as much information as you need to look for
‘hot spots’ where the code is using a great deal of computer time.
Likewise, because gcov accumulates statistics by line (at the lowest
resolution), it works best with a programming style that places only
one statement on each line. If you use complicated macros that expand
to loops or to other control structures, the statistics are less help‐
ful---they only report on the line where the macro call appears. If
--help
Display help about using gcov (on the standard output), and exit
without doing any further processing.
-v
--version
Display the gcov version number (on the standard output), and exit
without doing any further processing.
-a
--all-blocks
Write individual execution counts for every basic block. Normally
gcov outputs execution counts only for the main blocks of a line.
With this option you can determine if blocks within a single line
are not being executed.
-b
--branch-probabilities
Write branch frequencies to the output file, and write branch sum‐
mary info to the standard output. This option allows you to see
how often each branch in your program was taken. Unconditional
branches will not be shown, unless the -u option is given.
-c
--branch-counts
Write branch frequencies as the number of branches taken, rather
than the percentage of branches taken.
-n
--no-output
Do not create the gcov output file.
-l
--long-file-names
Create long file names for included source files. For example, if
the header file x.h contains code, and was included in the file
a.c, then running gcov on the file a.c will produce an output file
called a.c##x.h.gcov instead of x.h.gcov. This can be useful if
x.h is included in multiple source files. If you use the -p
option, both the including and included file names will be complete
path names.
-p
--preserve-paths
Preserve complete path information in the names of generated .gcov
files. Without this option, just the filename component is used.
With this option, all directories are used, with / characters
translated to # characters, . directory components removed and ..
components renamed to ^. This is useful if sourcefiles are in sev‐
eral different directories. It also affects the -l option.
-f
-u
--unconditional-branches
When branch probabilities are given, include those of unconditional
branches. Unconditional branches are normally not interesting.
gcov should be run with the current directory the same as that when you
invoked the compiler. Otherwise it will not be able to locate the
source files. gcov produces files called mangledname.gcov in the cur‐
rent directory. These contain the coverage information of the source
file they correspond to. One .gcov file is produced for each source
file containing code, which was compiled to produce the data files.
The mangledname part of the output file name is usually simply the
source file name, but can be something more complicated if the -l or -p
options are given. Refer to those options for details.
The .gcov files contain the : separated fields along with program
source code. The format is
<execution_count>:<line_number>:<source line text>
Additional block information may succeed each line, when requested by
command line option. The execution_count is - for lines containing no
code and ##### for lines which were never executed. Some lines of
information at the start have line_number of zero.
The preamble lines are of the form
-:0:<tag>:<value>
The ordering and number of these preamble lines will be augmented as
gcov development progresses --- do not rely on them remaining
unchanged. Use tag to locate a particular preamble line.
The additional block information is of the form
<tag> <information>
The information is human readable, but designed to be simple enough for
machine parsing too.
When printing percentages, 0% and 100% are only printed when the values
are exactly 0% and 100% respectively. Other values which would conven‐
tionally be rounded to 0% or 100% are instead printed as the nearest
non-boundary value.
When using gcov, you must first compile your program with two special
GCC options: -fprofile-arcs -ftest-coverage. This tells the compiler
to generate additional information needed by gcov (basically a flow
graph of the program) and also includes additional code in the object
files for generating the extra profiling information needed by gcov.
These additional files are placed in the directory where the object
90.00% of 10 source lines executed in file tmp.c
Creating tmp.c.gcov.
The file tmp.c.gcov contains output from gcov. Here is a sample:
-: 0:Source:tmp.c
-: 0:Graph:tmp.gcno
-: 0:Data:tmp.gcda
-: 0:Runs:1
-: 0:Programs:1
-: 1:#include <stdio.h>
-: 2:
-: 3:int main (void)
1: 4:{
1: 5: int i, total;
-: 6:
1: 7: total = 0;
-: 8:
11: 9: for (i = 0; i < 10; i++)
10: 10: total += i;
-: 11:
1: 12: if (total != 45)
#####: 13: printf ("Failure\n");
-: 14: else
1: 15: printf ("Success\n");
1: 16: return 0;
-: 17:}
When you use the -a option, you will get individual block counts, and
the output looks like this:
-: 0:Source:tmp.c
-: 0:Graph:tmp.gcno
-: 0:Data:tmp.gcda
-: 0:Runs:1
-: 0:Programs:1
-: 1:#include <stdio.h>
-: 2:
-: 3:int main (void)
1: 4:{
1: 4-block 0
1: 5: int i, total;
-: 6:
1: 7: total = 0;
-: 8:
11: 9: for (i = 0; i < 10; i++)
11: 9-block 0
10: 10: total += i;
10: 10-block 0
-: 11:
1: 12: if (total != 45)
1: 12-block 0
tion counts for individual blocks that end on that line. After each
block, the branch and call counts of the block will be shown, if the -b
option is given.
Because of the way GCC instruments calls, a call count can be shown
after a line with no individual blocks. As you can see, line 13 con‐
tains a basic block that was not executed.
When you use the -b option, your output looks like this:
$ gcov -b tmp.c
90.00% of 10 source lines executed in file tmp.c
80.00% of 5 branches executed in file tmp.c
80.00% of 5 branches taken at least once in file tmp.c
50.00% of 2 calls executed in file tmp.c
Creating tmp.c.gcov.
Here is a sample of a resulting tmp.c.gcov file:
-: 0:Source:tmp.c
-: 0:Graph:tmp.gcno
-: 0:Data:tmp.gcda
-: 0:Runs:1
-: 0:Programs:1
-: 1:#include <stdio.h>
-: 2:
-: 3:int main (void)
function main called 1 returned 1 blocks executed 75%
1: 4:{
1: 5: int i, total;
-: 6:
1: 7: total = 0;
-: 8:
11: 9: for (i = 0; i < 10; i++)
branch 0 taken 91% (fallthrough)
branch 1 taken 9%
10: 10: total += i;
-: 11:
1: 12: if (total != 45)
branch 0 taken 0% (fallthrough)
branch 1 taken 100%
#####: 13: printf ("Failure\n");
call 0 never executed
-: 14: else
1: 15: printf ("Success\n");
call 0 called 1 returned 100%
1: 16: return 0;
-: 17:}
For each function, a line is printed showing how many times the func‐
tion is called, how many times it returns and what percentage of the
function’s blocks were executed.
For a call, if it was executed at least once, then a percentage indi‐
cating the number of times the call returned divided by the number of
times the call was executed will be printed. This will usually be
100%, but may be less for functions that call "exit" or "longjmp", and
thus may not return every time they are called.
The execution counts are cumulative. If the example program were exe‐
cuted again without removing the .gcda file, the count for the number
of times each line in the source was executed would be added to the
results of the previous run(s). This is potentially useful in several
ways. For example, it could be used to accumulate data over a number
of program runs as part of a test verification suite, or to provide
more accurate long-term information over a large number of program
runs.
The data in the .gcda files is saved immediately before the program
exits. For each source file compiled with -fprofile-arcs, the profil‐
ing code first attempts to read in an existing .gcda file; if the file
doesn’t match the executable (differing number of basic block counts)
it will ignore the contents of the file. It then adds in the new exe‐
cution counts and finally writes the data to the file.
Using gcov with GCC Optimization
If you plan to use gcov to help optimize your code, you must first com‐
pile your program with two special GCC options: -fprofile-arcs
-ftest-coverage. Aside from that, you can use any other GCC options;
but if you want to prove that every single line in your program was
executed, you should not compile with optimization at the same time.
On some machines the optimizer can eliminate some simple code lines by
combining them with other lines. For example, code like this:
if (a != b)
c = 1;
else
c = 0;
can be compiled into one instruction on some machines. In this case,
there is no way for gcov to calculate separate execution counts for
each line because there isn’t separate code for each line. Hence the
gcov output looks like this if you compiled the program with optimiza‐
tion:
100: 12:if (a != b)
100: 13: c = 1;
100: 14:else
100: 15: c = 0;
The output shows that this block of code, combined by optimization,
executed 100 times. In one sense this result is correct, because there
was only one instruction representing all four of these lines. How‐
to that function, and remove or ignore the other. Unfortunately, it
will not remove the coverage counters for the unused function body.
Hence when instrumented, all but one use of that function will show
zero counts.
If the function is inlined in several places, the block structure in
each location might not be the same. For instance, a condition might
now be calculable at compile time in some instances. Because the cov‐
erage of all the uses of the inline function will be shown for the same
source lines, the line counts themselves might seem inconsistent.
SEE ALSO
gpl(7), gfdl(7), fsf-funding(7), gcc(1) and the Info entry for gcc.
COPYRIGHT
Copyright (c) 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free
Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "GNU General Public License" and "Funding Free
Software", the Front-Cover texts being (a) (see below), and with the
Back-Cover Texts being (b) (see below). A copy of the license is
included in the gfdl(7) man page.
(a) The FSF’s Front-Cover Text is:
A GNU Manual
(b) The FSF’s Back-Cover Text is:
You have freedom to copy and modify this GNU Manual, like GNU
software. Copies published by the Free Software Foundation raise
funds for GNU development.
gcc-4.1.2 2007-02-14 GCOV(1)
TechZilla.biz | TechZilla.info | SlicerUnderground | techzilla.50megs.com | Tohigherground | NextOnStage | EMUslax | GNUlinx | GamesOfDaPast | WorldCrimeWars | Fistula | Asus-Z81k | Riding-Gear | UniformDiscount | WorkWearIt | NuZilla